Difference between revisions of "Setup Cyberoam iView on Windows"

Latest revision as of 13:03, 7 April 2022

To configure cyberoam iView on Windows use following steps:

Create a VM with Windows 7. Initial feed-back from others is that Windows 8, 10 do not work. I have not tried iView setup on Windows yet.
Download Appropriate Windows setup file from https://sourceforge.net/projects/cyberoam-iview/files/ Name of latest stable release is typically shown at the top. You can also download installation manuals from the Documents folder from the same link.
In Windows installation must be done from *administrator* user only. Even if you try installation from other user (Eg Kiran) with administrative privileges, it will not work.
Do normal next, next, next type of installation
Reboot the machine
Check iView dashboard at http://<machine-ip>:8000/
Log into admin console on cyberoam
Go to "Logs & Reports" -> Configuration
Enter IP address of the iView server. Port number is 514. Select Facility Daemon and Severity Information or Debug. Format can be left as it is to CyberoamStandardFormat.
Go to "Log settings" tab
Select appropriate categories for which logs are desired for the newly added Log server
Again log into iView dashboard
Add the new device with appropriate name and type as 'cyberoam'
You can also go to iView Dashboard. System -> Archives -> Live Logs. Select the correct device and click Go. Also click 'Start update'.

@@ Line 1: / Line 1: @@
-<yambe:breadcrumb>Cyberoam_firewall|Cyberoam firewall</yambe:breadcrumb>
+[[Main_Page|Home]] > [[Enterprise security devices or applications]] > [[Cyberoam firewall]] > [[Setup Cyberoam iView on Windows]]
-=Setup Cyberoam iView on Windows=
 To configure cyberoam iView on Windows use following steps:
@@ Line 20: / Line 19: @@
-<yambe:breadcrumb>Cyberoam_firewall|Cyberoam firewall</yambe:breadcrumb>
+[[Main_Page|Home]] > [[Enterprise security devices or applications]] > [[Cyberoam firewall]] > [[Setup Cyberoam iView on Windows]]