Rocky 8.x RustDesk

Home > Rocky Linux or CentOS > Rocky Linux 8.x > Remote Access > RustDesk

RustDesk Server installation

Install RustDesk on Rocky 8.x using:

1. Create an instance with public IP.
2. Map DNS to public IP (IPv4 / IPv6 or both)
3. Based on preference:
   • Set hostname
   • Configure history retention
   • Add swap
   • Configure postfix and logwatch
4. Install wget

   dnf -y install wget

5. Download installation script, set execute permissions and execute it

   wget https://raw.githubusercontent.com/dinger1986/rustdeskinstall/master/install.sh
   chmod +x install.sh
   ./install.sh

6. When prompted for IP/DNS (or domain), choose 2 if DNS entry has been created for public IP
7. In case of DNS entry enter preferred domain name eg (remote.example.com)
8. When prompted for "Relay not set yet" select "yes" to download configs and setup http server
9. Finally press any key to complete installation

   Note the public key shown as part of installation output. It would have to be copied in clients for them to work

   Also note that admin username and password for accessing http://<fqdn>:8000/ based client download

10. Allow required rustdesk port via firewall

    firewall-cmd --zone=public --add-port=8000/tcp --permanent
    firewall-cmd --zone=public --add-port=21115-21119/tcp --permanent
    firewall-cmd --zone=public --add-port=21116/udp --permanent
    firewall-cmd --reload

Refer:

• https://rustdesk.com/docs/en/self-host/install/

Rustdesk client installation

The below steps dont seem to work on CentOS 8 / Rocky 8

1. Download CentOS 8 or Rocky 8 rpm package from https://github.com/rustdesk/rustdesk/releases or https://rustdesk.com/
2. Enable Raven using

   wget https://pkgs.dyn.su/el8/base/x86_64/raven-release-1.0-1.el8.noarch.rpm
   dnf -y localinstall ./raven-release-1.0-1.el8.noarch.rpm

3. Install rustdesk client using:

   dnf -y localinstall ./rustdesk-1.1.9-fedora28-centos8.rpm

4. If you see below error

       gcc -pthread -Wno-unused-result -Wsign-compare -DDYNAMIC_ANNOTATIONS_ENABLED=1 -DNDEBUG -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -D_GNU_SOURCE -fPIC -fwrapv -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -D_GNU_SOURCE -fPIC -fwrapv -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -D_GNU_SOURCE -fPIC -fwrapv -fPIC -I/usr/include/python3.6m -c evdev/input.c -o build/temp.linux-x86_64-3.6/evdev/input.o -std=c99 -Wno-error=declaration-after-statement
       evdev/input.c:10:10: fatal error: Python.h: No such file or directory
        #include <Python.h>
                 ^~~~~~~~~~
       compilation terminated.

   :

   Then notice -I in above command as ' -I/usr/include/python3.6m'. Then install appropriate python devel using:

   dnf -y install python36-devel python39-devel
   
   dnf -y remove rustdesk
   dnf -y localinstall ./rustdesk-1.1.9-fedora28-centos8.rpm

5. Open rustdesk client and go to ... -> ID/Relay server. In ID give FQDN of rustdesk server setup as above
6. Do similar setup on another client
7. Try to connect.

Refer:

• https://forums.centos.org/viewtopic.php?t=75136

Home > Rocky Linux or CentOS > Rocky Linux 8.x > Remote Access > RustDesk