Reinstalling grub on RAID partition

From Notes_Wiki
Revision as of 12:15, 28 July 2022 by Saurabh (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Home > CentOS > CentOS 6.x > System administration tools > Filesystem, partition or disk related tools > Software raid configuration > Reinstalling grub on RAID partition

Sometimes just using auto-detect may not work and system may not boot when one of the raid hard-disks is removed. In such cases we need to re-install grub on raid partition. To do this boot using installation CD and go to rescue mode. Then use 'chroot /mnt/sysimage'. Then use something like 'grub-install /dev/md<n>' where md<n> is the raid 1 partition for boot. Use 'sync' to ensure cached blocks from RAM are flushed to hard-disk. Then use 'reboot' and now system should boot properly even with one of the raid devices removed.



Home > CentOS > CentOS 6.x > System administration tools > Filesystem, partition or disk related tools > Software raid configuration > Reinstalling grub on RAID partition

Retrieved from "http://www.sbarjatiya.com/notes_wiki/index.php?title=Reinstalling_grub_on_RAID_partition&oldid=6703"