Factory reset VxRail 4.7 server

From Notes_Wiki
Revision as of 06:48, 20 June 2022 by Saurabh (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Home > VMWare platform > VxRail > Factory reset VxRail 4.7 server

If VxRail build fails Build VxRail 4.7 then you may need to factory reset nodes to try another build attempt using:

  1. Restart node
  2. Press 'F11' to go to Boot Manager
  3. Boot from SD-CARD
  4. Start RASR application
  5. Use 'F' for factory reset
    1. First factory reset used to fail on VxRail E650 with VxRail 4.7. After first reset failing do cold restart and do another reset which succeeds.
  6. After factory reset restart node. It would reboot many times and whole reset process may take up to hour on smaller nodes. During reset process there should not be any DHCP. On DHCP error message on first reboot press Enter.

Refer:


In case reset via SD Card is also not working see VxRail RASR SD card reset using RASR ISO


Home > VMWare platform > VxRail > Factory reset VxRail 4.7 server

Retrieved from "http://www.sbarjatiya.com/notes_wiki/index.php?title=Factory_reset_VxRail_4.7_server&oldid=6403"