<yambe:breadcrumb>Sonicwall_firewall|Sonicwall firewall</yambe:breadcrumb>

Sonicwall analyzer setup

Login to your mysonicwall.com account
Navigate to Downloads > Free Downloads section.
Select Software Type: "GMS/Analyzer - Windows" from drop-down list.
Download latest analyzer for Windows
Install analyzer using downloaded setup file. During installation give static IP of the analyzer machine and not the Sonicwall firewall.
Reboot the system after sonicwall analyzer is installed
Open http://127.0.0.1/ in browser
Login with admin:password
Set new admin password
In Status click on "Register" link
In Licenses
1. login with sonicwall.com username and password
2. Use serial number "ANALYZER" and give any friendly name. Leave authentication code empty, if not filled already
3. Note the serial number displayed and save it before clicking continue
Go to Deployment -> Roles. Fill in desired DB username and password. Click Update.
To add sonicwall appliance to analyzer:
1. Open URL http://localhost/sgms/auth
2. Go to firewall tab
3. Right click on "Global view" in left pane and choose "Add Unit"
4. Give sonicwall appliance IP address, admin username and password
5. Click ok
Configure firewall to work with analyzer
1. Login into firewall GUI
2. Go to Log -> Syslog
3. Add new syslog server. Give sonicwall analyzer IP and leave port 514
4. Go to Log -> Analyzer
5. Select "Enable Analyzer Settings"
6. Click "Accept"
Test by going to http://localhost/ in analyzer machine after waiting for 10-15 minutes.

Refer:

Anonymous