Miscellaneous openVZ notes

<yambe:breadcrumb>OpenvZ</yambe:breadcrumb>

Enabling iptables modules for container

Enabling iptables conntrack modules in container

By default iptables conntrack modules are not enabled for container. Hence 'state' module does not works properly within a container. To enable use of state module in container use:

vzctl set <CID> --iptables iptable_filter --iptables ip_conntrack --save

Note that this requires container to be stopped and then started again. Also base machine should have the connection tracking modules installed and preferably even in use through base machines firewall.

Enabling iptables nat module for container

By default nat module for iptables in not enabled for container. To enable the module use:

vzctl set <CID> --iptables iptable_nat --save

Source NAT for containers using base machine

Source NAT for containers can be done using base machine to provide LAN/Internet access to container without requiring an additional IP or exposing the container to outside world. To NAT outgoing connections from container use:

iptables -t nat -I POSTROUTING -s <container-private-IP> -o <exit-interface> -j SNAT --to-source <container-ip>

Enabling tun/tap devices for container

To enable tun/tap devices for container (to use container as VPN server) use following steps:

1. Use following commands with appropriate CID on base machine

   vzctl set <CID> --devnodes net/tun:rw --save
   vzctl set <CID> --devices c:10:200:rw --save
   vzctl set <CID> --capability net_admin:on --save

2. Use following commands as root user inside container

   mkdir -p /dev/net
   mknod /dev/net/tun c 10 200
   chmod 600 /dev/net/tun

3. Restart container

Correcting time-zone used in container

If the container image in use is configured for different time-zone then time-zone can be corrected using something like:

    rm -f /etc/localtime
    ln -s /usr/share/zoneinfo/Asia/Kolkata /etc/localtime

Checking process trees of all containers

Command 'pstree -pun | less' on base machine can help in seeing process tree of all containers which includes all container inits and their childrens. This can help in finding information about specific containers. A good way of finding out which init belongs to which container is to use:

lsof 2>&1 | grep <init-pid> | grep -v lsof

so that various files used by that process in base machine can be listed. Now if the given process has opened /vz/root/<CID>/dev/null file then it means it is init process of <CID> container.

Detecting if current machine or VM or container is using openVZ

To check if current host is using openVZ use following command as root user:

cat /proc/1/status | grep envID

If value is present and is 0 then openVZ is being used and the command was run on base host. Any other envID indicates CTID of the container being used.

<yambe:breadcrumb>OpenvZ</yambe:breadcrumb>