Setup Cyberoam iView on Windows
From Notes_Wiki
<yambe:breadcrumb>Cyberoam_firewall|Cyberoam firewall</yambe:breadcrumb>
Setup Cyberoam iView on Windows
To configure cyberoam iView on Windows use following steps:
- Create a VM with Windows 7. Initial feed-back from others is that Windows 8, 10 do not work. I have not tried iView setup on Windows yet.
- Download Appropriate Windows setup file from https://sourceforge.net/projects/cyberoam-iview/files/ Name of latest stable release is typically shown at the top. You can also download installation manuals from the Documents folder from the same link.
- In Windows installation must be done from *administrator* user only. Even if you try installation from other user (Eg Kiran) with administrative privileges, it will not work.
- Do normal next, next, next type of installation
- Reboot the machine
- Check iView dashboard at http://<machine-ip>:8000/
- Log into admin console on cyberoam
- Go to "Logs & Reports" -> Configuration
- Enter IP address of the iView server. Port number is 514. Select Facility Daemon and Severity Information or Debug. Format can be left as it is to CyberoamStandardFormat.
- Go to "Log settings" tab
- Select appropriate categories for which logs are desired for the newly added Log server
- Again log into iView dashboard
- Add the new device with appropriate name and type as 'cyberoam'
- You can also go to iView Dashboard. System -> Archives -> Live Logs. Select the correct device and click Go. Also click 'Start update'.
<yambe:breadcrumb>Cyberoam_firewall|Cyberoam firewall</yambe:breadcrumb>
