Paloalto give static management IP to new firewall
From Notes_Wiki
Revision as of 08:13, 15 June 2023 by Saurabh (talk | contribs) (Created page with "Home > Enterprise security devices or applications > Paloalto firewall > Paloalto give static management IP to new firewall After deploying a new virtual or physical palo-alto firewall use following on console to assign management IP: # Login with admin/admin #: Note that it may not work immediately. You may have to wait 5-10 minutes for it to work # During first login firewall will force to change default admin password # Then use below to as...")
Home > Enterprise security devices or applications > Paloalto firewall > Paloalto give static management IP to new firewall
After deploying a new virtual or physical palo-alto firewall use following on console to assign management IP:
- Login with admin/admin
- Note that it may not work immediately. You may have to wait 5-10 minutes for it to work
- During first login firewall will force to change default admin password
- Then use below to assign static IP
configure set deviceconfig system type static set deviceconfig system ip-address <ip> netmask <netmask> [default-gateway <gateway>] commit
- After this you can access firewall using https://<ip-address> assuming the management port is connected appropriately.
Home > Enterprise security devices or applications > Paloalto firewall > Paloalto give static management IP to new firewall
